LG Electronics Digital Camera LVC User Manual

Operating Instructions  
LVC-C300HM/HP/NM/NP LVC-C310HM/HP/NM/NP  
LVC-C301HM/HP/NM/NP LVC-C311HM/HP/NM/NP  
LVC-C302HM/HP/NM/NP LVC-C312HM/HP/NM/NP  
LVC-C303HM/HP/NM/NP LVC-C313HM/HP/NM/NP  
Before installing and using the camera,  
please read these instructions throughly  
and retain them for later reference.  
 
Contents  
Features............................................................................................................................................................................3  
Cautions for Safe Operation ............................................................................................................................................4  
Operating Controls and Their Functions.......................................................................................................................5  
Power IN/CONTROL.........................................................................................................................................................6  
External Key(A/D IN)........................................................................................................................................................7  
MENU DESCRIPTIONS ....................................................................................................................................................8  
CAMERA ID ..................................................................................................................................................................9  
FOCUS MODE SET...............................................................................................................................................10-11  
AWB SET...............................................................................................................................................................12-13  
AE SET ..................................................................................................................................................................14-16  
SPECIAL SET........................................................................................................................................................17-18  
MOTION DET..............................................................................................................................................................19  
F. OSD SET ................................................................................................................................................................20  
E. SENSITIVITY..........................................................................................................................................................21  
WDR SET....................................................................................................................................................................22  
On-Screen Display....................................................................................................................................................23-24  
Specifications ...........................................................................................................................................................25-26  
FEATURES  
The power zoom color video camera is designed for use in monitoring system.  
High resolution and high sensitivity with a 1/4 inch CCD (Charge Coupled Device)  
High magnitude of zoom lens with optical X 27, Digital X 270(MAX)  
Auto Focus  
Auto White balance  
Auto exposure with DC Iris control  
Day & Night function : LVC-C310  
DSS(Digital Slow Shutter) is available : Optional  
WDR(Wide Dynamic Range) is available : Optional  
3
 
Cautions for Safe Operation  
Power Supply  
This camera must always be operated a 12V DC  
UL Listed, Class 2 Power Supply only.  
• Close to generators of powerful electromagnetic  
radiation such as radio or TV transmitters.  
Care of the unit  
Handling of the unit  
• Remove dust or dirt on the surface of the lens  
with a blower.  
• Use a dry soft cloth to clean the body. If it is very  
dirty, use a cloth dampened with a small quantity  
of neutral detergent, then wipe dry.  
• Avoid the use of volatile solvents such as  
thinners, alcohol, benzene, and insecticides.  
They may damage the surface finish and/or  
impair the operation of the camera.  
Be careful not to spill water or other liquids on the  
unit, or to get combustible or metallic material  
inside the body. If used with foreign matter inside,  
the camera is liable to fail, or to be a cause of fire  
or electric shock.  
Operating and storage location  
Avoid viewing a very bright object (such as light fit-  
tings) for an extended period. Avoid operating or  
storing the unit in the following locations.  
• Extremely hot or cold places (operating tempera-  
°
°
ture 0 C-45 C)  
• Damp or dust place  
• Where it is exposed to rain  
• Where it is subject to strong vibration  
4
 
Operating Controls and Their Functions  
1. Tripod adaptor  
1
This adaptor can also be attached on the bottom of the camera.  
2
2. Lens mount cap  
3. TELE Key  
When push the TELE KEY, picture is telephoto  
4. WIDE Key  
When push the WIDE KEY, picture is wide angle  
5. Focus Near Key  
In a manual situation, focus get near.  
6. Focus Far Key  
In a manual situation, focus get far.  
7. Menu Key  
If you want to set up a diverse function, you can push this button.  
8. Video output (S-Video type)  
Connect to the S-Video in connector of a monitor.  
9. Interface of camera control JACK (6 Pin Din Jack Type)  
• Connect to an external voltage controller  
• You can supply a camera with power from this. (DC12V)  
10. Video output(BNC type)  
Connect to the video in connector of a monitor.  
5
 
Power In / Control  
You can adjust focus and zoom by a pin terminal on the back side  
of the camera.  
1
6
5
2
3
4
is the color of the cable.(If it is offered)  
Adjust voltage from 1 pin and 2 pin  
*
6
 
External Key (A/D IN)  
Schematic diagram of wired  
remote-control  
1) C300'S  
2) C310'S  
6.8K  
8.2K  
12K  
18K  
33K  
68K  
180K  
7
 
MENU DESCRIPTIONS  
page 9  
page 10  
page 12  
page 14  
page 17  
page 19  
page 20  
page 21  
page 22  
Using TELE, WIDE, FOCUS+, FOCUS- button  
TELE and WIDE are used for UP and DOWN.  
FOCUS+ and FOCUS- are used for INCREASE and DECREASE the data.  
8
 
CAMERA ID  
1. CAMERA ID  
To connect a large number of camera , It can be  
assigned to identification number to each camera for  
camera control easily.  
(OFF, 0 - 255 : total numbers of ID are 256)  
• It only can be set this function using ID commend.  
To transfer ID Code of camera , In first byte at PC control.  
Set the ID number of camera , and then the ID number  
display continuously.  
9
 
FOCUS MODE SET  
2. Focus Set:  
2-1. Focus Mode Set :  
This function is for focus mode setting  
A) Set up “FOCUS SET” in main menu using Menu key.  
Select the “FOCUS MODE” in submenu using Tele/Wide  
key. And then set the mode (Auto, Push auto, or Manual)  
using Focus key.  
PUSH  
2-2. Focus Distance Set :  
This function is for selection of minimum shooting  
distance.  
A) Select the “FOCUS DIST” in submenu using Tele/wide key.  
B) Set the focus distance mode from 1cm to 5M. (1cm, 10cm,  
50cm, 1M, 3M, 5M) using Focus key.  
2-3. ZOOM START Set :  
This function is for selection of zoom start position.  
A) Select the “ZOOM START” in submenu using Tele/wide key.  
B) Set the Zoom start mode from x1 to x27. using Focus key.  
10  
 
FOCUS MODE SET  
2-4. ZOOM END Set :  
This function is for selection of zoom end position.  
A) Select the “ZOOM END” in submenu using Tele/wide key.  
B) Set the Zoom end mode from (Zoom Start + 1) x 270 to X using  
Focus key.  
PUSH  
2-5. ZOOM SPEED Set :  
This function is for selection of zoom speed.  
A) Select the “ZOOM SPEED” in submenu using Tele/wide key.  
B) Set the Zoom speed, Slow, Middle , Quick using Focus key.  
2-6. ZOOM TRACKING MODE Set :  
This function is for selection of zoom tracking mode.  
A) Select the “ZTRK” in submenu using Tele/wide Command,  
B) Set the Zoom tracking mode to Auto or Manual.  
* Zoom tracking means focused zooming state.  
2-7. INITIAL SET :  
If initial mode set to ON, All FOCUS SET function is  
changed to the factory setting.  
A) Select the “INITIAL SET” in submenu using Tele/wide key.  
B) Set the initial set mode to ON or OFF using Focus key.  
2-8. RETURN TO MAIN MENU :  
This function is exit to main menu.  
A) Select the “RETURN” in submenu using Tele/wide key.  
B) Set the return mode using Focus key.  
11  
 
AWB SET  
3. AWB SET  
3-1. WB Mode Set :  
This function is for changing the WB mode.  
A) Set up “AWB SET” in main menu using Tele/wide key.  
B) Select the “WB MODE” in submenu using Tele/wide key.  
C) Set the mode Auto, Push auto , Manual, Outdoor, Indoor,  
Special using Focus key.  
*WBC MODE ; Use for changing White Balance Mode .  
1) AUTO ; WB Range 2800 °K ~ 8000 °K .  
2) PUSH AUTO ; Set the AWB mode to Push Auto, then WB  
Mode is auto.  
3) SPECIAL ; Under the special WB condition( Differ from curve of the  
control color temperature ) , Adjust Red and Blue to perform a  
desired Auto White Balance.  
3-2. RED ADJUST Set :  
This function is available for Special ,Push Auto,  
Manual WB mode.  
This mode is the adjustment of user option for special color.  
A) Select the “RED ADJUST” in submenu using Tele/wide key.  
B) Adjust the level from (-30 to 30 SPECIAL,  
-128 to +127 PUSH AUTO, 0-255 MANUAL) using Focus key.  
12  
 
AWB SET  
3-3. BLUE ADJUST Set :  
This function is available for Special ,Push Auto,  
Manual WB mode.  
This mode is the adjustment of user option for special  
color.  
A) Select the “BLUE ADJUST” in submenu using Tele/wide key.  
B) Adjust the level from (-30 to 30 SPECIAL,  
-128 to +127 PUSH AUTO, 0-255 MANUAL) using Focus key.  
3-4. PUSH AUTO :  
In case of PUSH AUTO WB mode.  
Adjust the push auto mode ON, WB act automatically.  
3-5. INITIAL SET :  
If initial mode set to ON, All AWB function is changed  
to the factory setting  
A) Select the “INITIAL SET” in submenu using Tele/wide key.  
B) Set the initial set mode to ON or OFF using Focus key.  
3-6. RETURN TO MAIN MENU :  
This function is exit to main menu.  
A) Select the “RETURN “ in submenu. Using Tele/wide key.  
B) Set the return mode using Focus key.  
13  
 
AE SET  
4. AE SET  
4-1. AE Mode Set :  
This function is for changing to AE mode.  
A) Set up “AE SET” in main menu using Tele/wide key.  
B) Select the “AE MODE” in submenu using Tele/wide key.  
C) Set the mode auto, IRIS MAN, AGC MAN, Manual, Auto using  
Focus key.  
4-2. IRIS ADJUST Set :  
This function is available for IRIS MAN mode.  
A) Select the “IRIS ADJUST” in submenu using Tele/wide key.  
B) Adjust the level from ##MIN to ##MAX(MANUAL, IRIS MAN) using  
Focus key.  
* ## : Current level at Auto mode.  
4-3. AGC ADJUST Set :  
This function is available for AGC MAN mode.  
A) Select the “IRIS ADJUST” in submenu using Tele/wide key.  
B) Adjust the level from ##MIN to ##MAX(MANUAL, AGC MAN) using  
Focus key.  
* ## : Current level at Auto mode.  
14  
 
AE SET  
4-4. BRIGHTNESS ADJUSTMENT Set :  
A) Select the “BRIGHTNESS” in submenu using Tele/wide key.  
B) Adjust the level from ##MIN to ##MAX. using Focus key.  
* ## : Current level at Auto mode.  
4-5. BACKLIGHT Set :  
A) Select the “BACKLIGHT” in submenu using Tele/wide key.  
B) Set the mode OFF, ON, or AUTO using Focus key.  
* Auto BLC (Auto back light compensation)  
When a back light condition occurs in area1,area2, area3, or area4.  
the back light compensation is enable. When the back light  
condition disappears in that area,  
BLC is disable automatically. If do not want this mode, set to OFF  
4-6. FLICKERLESS Set :  
A) Select the “FLICKERLESS” in submenu using Tele/wide key.  
Area1  
B) Set the mode OFF, ON using Focus key.  
Area3  
Area2 Area0  
Area4  
* FLICKERLESS ; Use for removing the flicker of picture  
ON : Remove the flicker ( In case of PAL System ; Shutter Speed  
1/120 sec ).  
Auto BLC  
15  
 
AE SET  
4-7. SHUTTER SPEED Set :  
A) Select the “SHUTTER” in submenu using Tele/wide key.  
B) Set the mode NORMAL, 1/125 - 1/10000 using Focus key.  
4-8. INITIAL SET :  
A) Select the “INITIAL SET” in submenu using Tele/wide  
Command,  
B) Set the initial set mode to ON or OFF using Focus key.  
4-9. RETURN TO MAIN MENU :  
This function is exit to main menu.  
A) Select the “RETURN “ in submenu using Tele/wide key.  
B) Set the return mode using Focus key.  
16  
 
SPECIAL SET  
5. SPECIAL SET  
5-1. User Title Set :  
This function is for custom title on screen display.  
A) Set “SPECIAL SET” in main menu using Tele/wide key.  
B) Select the “USER TITLE” in submenu using Tele/wide key.  
C) Set the position of title and set data using Tele / Wide,  
Focus key.  
5-2. SHARPNESS ADJUST Set :  
A) Select the “SHARPNESS” in submenu using Tele/wide key.  
B) Adjust the level from 0 to 15 using Focus key.  
5-3. MIRROR Set :  
A) Select the “MIRROR” in submenu using Tele/wide key.  
B) Select the mode ON, OFF using Focus key.  
5-4. COLOR Set :  
This mode is for B/W mode.  
A) Select the “COLOR” in submenu using Tele/wide key.  
B) Select the mode ON, OFF using Focus key.  
17  
 
SPECIAL SET  
5-5. NEGATIVE Set :  
This mode is to change color and luminance to negative.  
A) Select the “COLOR” in submenu using Tele/wide key.  
B) Select the mode ON, OFF using Focus key.  
5-6. WIDE BURST Set :  
This mode is to change color burst width for long dis-  
tance application.  
A) Select the “WIDEBURST” in submenu using Tele/wide key.  
B) Select the mode ON, OFF using Focus key.  
5-7. INITIAL SET :  
If initial mode set to ON, All SPECIAL functions are changed to the factory setting  
A) Select the “INITIAL SET” in submenu using Tele/wide key.  
B) Set the initial set mode to ON or OFF Using Focus key.  
5-8. RETURN TO MAIN MENU :  
This function is exit to main menu.  
A) Select the “RETURN” in submenu using Tele/wide key.  
B) Set the return mode Using Focus key.  
18  
 
MOTION DET  
6. MOTION DETECTION SET  
6-1. DETECTION Mode Set :  
A) Set “MOTION” in main menu using Tele/wide key.  
B) Select the “DETECTION” in submenu. Using Tele/wide key.  
C) Set the mode ON, OFF using Focus key.  
6-2. LEVEL ADJUST Set :  
This function is available for DETECTION ON mode.  
A) Select the “LEVEL SET” in submenu. Using Tele/wide key.  
B) Adjust the level to some sensitivity using Focus key.  
6-3. INITIAL SET :  
If initial mode set to ON, All MOTION functions are  
changed to the factory setting  
A) Select the “INITIAL SET” in submenu using Tele/wide key.  
B) Set the initial set mode to ON or OFF Using Focus key.  
6-4. RETURN TO MAIN MENU :  
This function is exit to main menu.  
A) Select the “RETURN” in submenu using Tele/wide key.  
B) Set the return mode Using Focus key.  
19  
 
F. OSD SET  
7. F. OSD SET  
7-1. FUNCTION Set :  
A) Set “F. OSD” in main menu using Tele/wide key.  
B) Select the mode what you want in submenu using Tele/wide key.  
C) Set the display mode of OSD using Tele / Wide, Near/Far key.  
*INITIAL SET and RETURN are the same as before procedure.  
20  
 
E. SENSITIVITY SET  
8. E. SENSITIVITY SET: (OPTION)  
8-1. E. SENSITIVITY SET  
A) Select the “E.SENSITIVITY” in submenu using Tele/wide key.  
B) Select the sensitivity mode what you want in submenu using  
Focus key.  
* Mode sequence : OFF-X2 AUTO-X4 AUTO-X8 AUTO-  
X10AUTO-X16 AUTO- X32 AUTO  
-OFF- X2 FIX-X4 FIX -X8 FIX -X10 FIX -X16 FIX - X32 FIX-OFF  
8-2. INITIAL SET :  
If initial mode set to ON, E.SENSITITY functions are  
changed to the factory setting  
A) Select the “INITIAL SET” in submenu using Tele/wide key.  
B) Set the initial set mode to ON or OFF Using Focus key.  
8-3. RETURN TO MAIN MENU :  
This function is exit to main menu.  
A) Select the “RETURN” in submenu using Tele/wide key.  
B) Set the return mode Using Focus key.  
21  
 
WDR SET  
9. WDR SET (OPTION)  
9-1. WDR SET  
A) Select the “WDR” in main menu using Tele/wide key.  
B) Select the “WDR CONTROL” in submenu using Tele/wide key.  
C) Select the WDR mode what you want in submenu using Focus key.  
* Mode sequence : OFF -- ON -- AUTO  
WDR  
* WDR Auto mode is working at the condition of high light  
back light.  
9-2. LEVEL ADJUST Set :  
This function is the gain adjustment of WDR  
A) Select the “SENSITIVITY” in submenu using Tele/wide key.  
B) Adjust the level to some sensitivity using Focus key.  
9-3. INITIAL SET :  
If initial mode set to ON, All WDR functions are  
changed to the factory setting  
A) Select the “INITIAL SET” in submenu using Tele/wide key.  
B) Set the initial set mode to ON or OFF Using Focus key.  
9-4. RETURN TO MAIN MENU :  
This function is exit to main menu.  
A) Select the “RETURN” in submenu using Tele/wide key.  
B) Set the return mode Using Focus key.  
22  
 
On Screen Display  
FUNCTION  
OSD Format  
Description  
Some of these functions will  
be displayed every time the  
camera is operated and  
then disappeared after 5  
seconds.  
1. Focus Mode  
Non display  
Auto Mode  
Manual / push Auto Mode  
Back Light OFF  
2. Back Light  
Non display  
“BL”display  
Non display  
“Ff”display  
1/125  
BLC ON / Auto BLC Mode  
Normal Shutter ( PAL: 1/50)  
Flickerless Mode  
3. Shutter Speed  
1
2
3
6
1/10,000  
4. STAND-BY  
5. CAMERA ID  
Indicate the camera stand-by during the  
camera’s power turning ON.  
STAND-BY  
According to write the identification number to  
each camera, Multi-point control is available  
(PC Control 000~255).  
5
7
4
23  
 
On Screen Display  
FUNCTION  
OSD Format  
Description  
6. WBC Mode  
White Balance AUTO  
Special Auto White Balance; Adjustment Mode according to  
change of external illuminant. RED ADJUST and BLUE  
ADJUST (0~255) are available. After changing R/B value, The  
mainternance mode is “AUTO”.  
S
W
WB Preset for INDOOR (3200°K)  
Wb Preset for OUTDOOR (5100°K)  
M
W
Manual WB Adjustment; In manual mode the HUE control is  
available (0 ~ 99).  
Push Auto White Balance; Turn this mode ON, the white trace  
automatically. Turn this mode OFF, preserve the white of final  
auto tracing action (Manual).  
P
W
7. ZOOM Display  
DX 270  
X 27  
Digital Zoom mode  
Optical Zoom mode  
24  
 
Specifications  
Image device  
1/4" interline transfer CCD  
NTST, High resolution : 811(H) X 508(V) 410K  
NTST, Normal resolution : 537(H) X 505(V) 270K  
PAL, High resolution : 795 (H) X 596 (V) 470K  
PAL, Normal resolution : 537(H) X 597(V) 320K  
Sync system  
Internal sync  
Approx.480 Line (NTSC, High resolution)  
Horizontal resolution  
320 Line (NTSC, Normal resolution)  
470 Line (PAL, High resolution)  
320 Line (PAL, Normal resolution)  
(at center of screen)  
Lens  
X 27 Zoom (F 1.5 (W), F 3.8 (T) f= 3.25 ~ 88.0 mm), Video AF  
X 10 (Total Zoom Ratio X 270)  
Digital Zoom Ratio  
Minimum illumination  
Normal Mode : 1 Lux (30 IRE)  
Electronic Shutter Speed Mode :  
0.01 Lux (X32 Field Accumulate)  
Night Mode : 0 Lux (Infrared ON)  
S/N  
More than 48dB  
2:1 Interlace  
Scanning System  
Scanning Frequency(H)  
Scanning Frequency(V)  
15.734 kHz (NTSC), 15.625 kHz (PAL)  
60Hz (NTSC), 50Hz (PAL)  
25  
 
Specifications  
Focal Length  
3.24mm (WIDE), 86mm (TELE)  
OSD(On Screen Display) English  
Power requirement  
Video output  
12V DC UL Listed, Class 2 Power Supply only  
Composite Output 75Ω Terminated / Y,C Separated  
5.3W  
Power consumption  
operating temperature  
Operating Humidity  
Storage temperature  
Dimensions  
0°C - 45°C  
0% RH - 60% RH  
-20°C - 60°C, 0% RH - 85% RH  
57mm(W) X 62.4mm(H) X 98.5mm(D)  
Weight  
500g  
Specifications are subject to change without notice.  
26  
 
 
P/NO: MFL30580130  
 

LaCie DVD Player DVD RW Slim User Manual
LG Electronics Flat Panel Television 223DCH User Manual
Lincoln Electric Welder 248HO User Manual
Lucent Technologies Telephone 555 230 796 User Manual
Mackie Musical Instrument De Esser User Manual
Magnavox Car Stereo System AZ 8068 User Manual
Makita Grinder Angle Grinder User Manual
Manhattan Computer Products Satellite TV System ST 250 User Manual
Martin Audio Portable Speaker W8LCD User Manual
Maytag Washer W10176966C User Manual