Lightolier Work Light C4P20MHGA User Manual

Calculite® HID Adjustable Accent C4P20MHGA  
Page 1 of 2  
4 1/2" Aperture, PAR20 Ceramic Metal Halide, Glasslite  
Ceiling Cutout: 5 1/8" (130mm) Dia.  
Glasslite Trim  
Frame-In Kit  
Lamp  
C4A39P20E1 Electronic 120V  
39W PAR20 Ceramic MH  
C4P20MHGA  
Etched glass with matching flange.  
C4A39P20E2 Electronic 277V  
39W PAR20 Ceramic MH  
Features  
Electrical  
1. Glasslite Trim: One piece borosilicate glass with integral flange, etched  
interior and white ceramic coated exterior. Etched white cone finish emits  
a subtle glow. Hinged, and snaps onto lamp-holder assembly for easy  
tool-less installation.  
Electronic Ballast: 120V or 277V, 50/60 Hz. encased, high power factor, T.H.D.  
<15%, thermally and transient protected, RMI/RFI complies with FCC part 18  
non-consumer limits, shut-down circuit at end of lamp life, sound rating "A",  
-5° F minimum starting temperature, Type 1 Outdoor rating.  
2. Lamp Holder / Trim Adjustment Assembly: Unitized optics insure  
alignment of lamp and aperture cone regardless of ceiling thickness. Provides  
35° vertical tilt, 360°+ horizontal rotation; lockable. Patented EZ-Aim Helical  
Drive System provides fast and accurate hot aiming with Philips screwdriver.  
3. Socket: Medium base porcelain pulse rated socket with nickel plated  
screwshell. Unitized construction assures proper alignment of lamp to  
optics for consistent optical performance.  
Ballast  
39W MH M130  
ANSI Code Voltage Max. Amps Input Watts  
120/277 0.39/0.17 44  
Options and Accessories  
CAH4: Accessory holder accepts up to two 3 34” dia. media.  
Chicago Plenum: Consult Factory.  
4. Frame Housing: Steel, 0.029" (22-Ga.), matte black finish.  
5. Frame Vertical Adjustment Mechanism: Accommodates mounting to  
virtually any ceiling system using pre-installed mounting bars, or 1/2" EMT  
tubing (by others). Single locking feature secures all adjustments. Alignment  
holes and markings allow fixture to be pre-set prior to installation. Final  
adjustment can be made from below from inside fixture.  
Labels  
UL (suitable for wet locations), I.B.E.W.  
6. Mounting Bars: Galvanized steel, 0.048" (18-ga.), pre-installed telescoping  
bars extend to 30" long and lock securely into position. Built-in locking  
tabs provide positive attachment to common T-bar systems. Self-centering  
feature simplifies installation in 24" O.C. grid systems. Attaches to steel or  
wood joists without accessories.  
7. Retention Springs: Rust resistant springs secure trim for quick, tool-less  
installation.  
8. Ballast / Cover Assembly: Accessible from below and removable without  
tools for inspection and ballast replacement .  
Job Information  
Type:  
9. Junction Box: 0.059" (16-ga.) galvanized steel. UL listed for 8 No. 12 AWG,  
90°C through branch circuit conductors. Allows inspection from below.  
10. Optional Accessory Holder: Catalog # CAH4. Sold separately; die-formed  
steel, matte black finish, slide-in installation. Accepts up to two 3 34" dia. media.  
11. Thermal Protector: (Not Shown) Meets NEC and UL requirements. Do not  
install insulation above nor within 3" (76mm) of any part of the luminaire.  
Job Name:  
Cat. No.:  
Lamp(s):  
Notes:  
Lightolier a Genlyte Thomas Company  
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710  
We reserve the right to change details of design, materials and finish.  
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504  
 

Lenmar Enterprises Cell Phone Accessories BCGS324K W User Manual
Lenovo Laptop 147500112 User Manual
LG Electronics Cell Phone UX220 User Manual
Liebert Refrigerator XDP160RA User Manual
Linear Home Security System DXS 54 EC User Manual
Linksys Network Router WRTSL54GS User Manual
Maverick Ventures Thermometer ET 84 User Manual
Maytag Washer Dryer TDL 0050B B User Manual
Metra Electronics Automobile Accessories 95 9308B User Manual
Metra Electronics Automobile Accessories 99 6502 User Manual