Lightolier Work Light C6T6VN User Manual

Calculite® HID Downlight C6T6VN  
Page 1 of 2  
6" Aperture, 2pc Vertical, T6 Narrow Beam  
Top View: Magnetic Ballast  
Top View: Electronic Ballast  
Ceiling Cutout: 6 9/16” (167 mm) Dia.  
Reflector Trim  
C6T6VN CLW  
Frame-In Kit  
Lamp  
39W T6  
39W T6  
70W T6  
70W T6  
150W T6  
150W T6  
C639T6E1  
C639T6E2  
C670T6E1  
C670T6E2  
C615T6E1  
C615T6E2  
C615T6U  
Electronic 120V  
Ceramic Metal Halide  
Ceramic Metal Halide  
Ceramic Metal Halide  
Ceramic Metal Halide  
Ceramic Metal Halide  
Ceramic Metal Halide  
Ceramic Metal Halide  
Specular Clear, White Painted Flange.  
Specular Clear, Matching Flange.  
Comfort Clear Diffuse, White Painted Flange.  
Comfort Clear Diffuse, Matching Flange.  
Champagne Bronze, White Painted Flange.  
Champagne Bronze, Matching Flange.  
Electronic 277V  
Electronic 120V  
Electronic 277V  
Electronic 120V  
Electronic 277V  
CLP  
CCDW  
CCDP  
CCZW  
CCZP  
Magnetic 120V/277V 150W T6  
Features  
Electrical (cont.)  
1. Upper Reflector: Clear anodized aluminum, 0.040" (16-ga.). Provides narrow  
beam optics ideal for high ceilings. Also available in medium and wide beam,  
see C4T4VM and C4T4VW specification sheets.  
150W Magnetic Ballast: 120/277V dual voltage, 60 Hz., encased and potted,  
HX-HPF circuit type, high power factor, sound rating “B”, -20°F minimum starting  
temperature, Type 1 Outdoor rating.  
2. Aperture Cone: Provides 50° visual cut-off to lamp and lamp image; self-  
flange in painted white or aperture-matching polished flange. Consult factory  
for other finishes.  
3. Lamp Shield: High-temperature glass as required by code, captive during  
re-lamping. Light diffusion provides exceptionally smooth beam.  
4. Socket Housing: Galvanized steel, pre-wired with G12 pulse rated socket.  
Snaps onto upper reflector for secure attachment without tools; assures  
proper lamp alignment to optics for consistent performance.  
5. Mounting Frame: 0.048" (18-ga.) galvanized steel. Vertical adjustment  
mechanism accommodates mounting to virtually any ceiling system using  
mounting bars (provided, or 1/2" EMT tubing (by others). Single locking  
feature secures all adjustments. Alignment holes and markings allow fixture  
to be preset prior to installation.  
6. Mounting Ring: 0.048"(18-ga.) galvanized steel. Designed for vertical  
adjustment from above or below for ceilings from 0" to 2" thick. Center-line  
notches allow consistent alignment of multiple fixtures.  
Ballast  
ANSI Code Voltage Max. Amps Input Watts  
39W MH M130  
70W MH M139  
150W MH M142  
*150W MH M142  
*Magnetic Ballast  
120/277 0.39/0.17  
120/277 0.67/0.29  
120/277 1.40/0.60  
120/277 3.70/1.60  
44  
78  
169/166  
180  
Options and Accessories  
Auxiliary: Add suffix A to Frame-In Kit and Reflector Trim. See Spec.Sheet  
”A/E“. For 277 electronic consult factory  
Emergency: Add suffix E to Reflector Trim and Frame-In Kit. See Spec. Sheet  
“A/E”.  
Slope Ceiling Adapters: See Specification Sheet SCA.  
Chicago Plenum: Consult Factory.  
Labels  
cULus (Suitable for Damp Locations), I.B.E.W. For 150W, install fixtures with  
minimum spacing; 3 feet from center-to center of adjacent luminaries, 3” from  
top of luminaire to overhead building member; 1 1/2 feet from luminaire center to  
side building member.  
7. Mounting Bars: 0.048" (18-ga.) pre-installed, telescoping bars extend to  
30" long and lock securely into position. Built-in locking tabs provide positive  
attachment to common T-bar systems. Self-centering feature simplifies  
installation in 24" O.C. grid systems. Attaches to steel or wood joists without  
accessories.  
Job Information  
Type:  
8. Trim Retention Springs: Rust resistant springs secure reflector/housing for  
quick, tool-less installation.  
Job Name:  
Cat. No.:  
9. Ballast / Socket Housing / Cover Assembly: Snaps onto junction box  
without tools for inspection and ballast replacement, accessible from below.  
10.Junction Box: 0.048" (18-ga.) galvanized steel. UL listed for 8 No. 12 AWG,  
90°C through branch circuit conductors. Allows inspection from below.  
11. Thermal Protector: (Not Shown) Meets NEC and UL requirements. Do not  
install insulation above nor within 3" (76mm) of any part of the luminaire.  
Lamp(s):  
Notes:  
Electrical  
Electronic Ballast: 120 or 277V, 50/60 Hz., encased, high power factor, T.H.D.  
<15%, thermally and transient protected, RMI/RFI complies with FCC Part 18  
non-consumer equipment, shut-down circuit at end of lamp life, sound rating “A”,  
-5°F (-20°F for 150W) minimum starting temperature, Type 1 outdoor rating.  
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710  
We reserve the right to change details of design, materials and finish.  
Lightolier is a Philips group brand  
 

Land Pride Utility Vehicle 4220ST User Manual
Lenmar Enterprises Battery Charger BCR10 User Manual
Lenovo Network Router 8791 User Manual
LG Electronics Clothes Dryer ELPMBPJF User Manual
Lux Products Thermostat P521Ub User Manual
Marcum Technologies SONAR LX 3 User Manual
Master Chef Electric Grill 85 1027 0 User Manual
Melissa Coffeemaker 645 097 User Manual
Memorex DVD Player MVDP1088 User Manual
Metrologic Instruments Scanner Hand Held Scanner User Manual